JM 1ST APPROACH

Fitting standard 2- by 4-inch construction, the easy-to-install RW-5802 can accommodate any new or existing structure with a minimum 0.5-inch dry wall surface. Because it features an MDF baffle with a reinforced composite sealed enclosure, this high-powered, passive module subwoofer provides guaranteed performance and minimizes sound transfer into adjacent rooms.

The RW-5802 gets its deep-driving bass courtesy of dual 8-inch long-throw woofers. These exclusive drivers feature stiff, well-damped Cerametallic cones, a specially treated aluminum that has been anodized, or electrochemically transformed into ceramic on both outer surfaces. Second only to diamond in strength, this ceramic compound allows the woofers to move at high speeds without blurring the sound like conventional designs.

Designed to power the RW-5802, the RSA-500 amplifier will drive up to two subwoofer modules and delivers 300 watts into an 8-ohm load (one subwoofer module) and 500 watts into a 4-ohm load (two subwoofer modules). It also comes with rack ears for quick and easy installation.

*While the RW-5802 in-wall subwoofer and RSA-500 subwoofer amplifier are sold separately, they must be used in conjunction with one another.

[Features]

Dual active 8" Cerametallic woofers

Sealed integrated enclosure for maximum installation flexibility

Paintable bezel and rustproof aluminum grille

High power handling

[RW-5802 Specifications]

frequency response 45-140Hz 4dB

sensitivity 90dB @ 1 watt/ 1 meter

nominal impedance 8 ohms

amplifier power See RSA-500 specifications

woofer Dual 8" (30.5cm) front firing, Cerametallic cone, cast aluminum frame drivers

amplifier Use only with RSA-500

enclosure material MDF baffle, ABS shell

enclosure type Sealed Enclosure

height 20.8" (52.7cm)

width 11.8" (29.8cm)

depth 3.7" (9.4cm)

cutout dimensions 19" (48.3 cm) x 10" (25.4 cm)

installation kit IK-802-W (sold separately)

weight 22 lbs. (10kg)

finishes White